SC732 Chassis Manual
4-12
Figure 4-11: Locating Expansion Card Components
Expansion Card and PCI Slot Setup
The SC732 chassis includes seven PCI card slots for expansion cards. The number
of cards used varies, depending upon the motherboard models.
Installing Expansion Cards
Disconnect the chassis from any power source.
1.
Depress the release latch (A) which holds the protective bracket (B) and
2.
secures the add-on card brackets to the chassis.
Lower the protective bracket over the top of the expansion card dummy
3.
brackets as shown in the lower illustration.
Remove the expansion card dummy brackets from their slots.
4.
Simultaneously, slide the expansion card and its bracket into the slot on the
5.
chassis, and insert the expansion card into its slot on the motherboard.
If desired, screws can be used to secure the expansion card into the chassis.
6.
Close the protective bracket over the tops of the expansion card brackets.
7.
Release
Latch (A)
Protective
Bracket (B)
PCI Card Slots
4-8 Installing Expansion Cards
1
3
1
2
Summary of Contents for Supero SC732 Series
Page 6: ...SC732 Chassis Manual vi Notes ...
Page 20: ...SC732 Chassis Manual 3 6 Notes ...