SC745 Air Shroud User’s Guide
3-10
3-5
Installing the SC745 Air Shroud
To install the SC745 air shroud follow the procedure below. This procedure is the same
for all configurations of the SC745 air shroud in 4U systems.
Installing the SC745 Air Shroud in SC745 Chassis Systems
1.
Configure the air shroud to fit in your system. See
Section 3-4
for details on
configuring the air shroud.
2.
Secure the rear edge of the SC745 air shroud to the top-rear part of the chassis
interior so that the SC745 mounting screw holes are aligned in with the mounting
screw holes of the chassis, and align so that the slot of air shroud’s front mounts
with the mounting tab at the top-front part of the chassis interior (see
Figure 3-9
).
Figure 3-9. Inserting Air Shroud onto a System Mainboard
Mounting Holes in
Top Rear Edge of
Chassis Interior
Mounting Holes in Rear
of Component A
Mounting Tab
on Chassis
Mounting
Slot on Air
Shroud
