2-16
S
UPER SC832/SC833 Chassis
User’s Guide
3. Secure the motherboard to the chassis with Type A(6-32) screws as shown
above. (*Please refer to Page 2-1 MB kit for the Type A screw.)
4. Secure the CPU heatsink mechanism to the motherboard.
2. Install standoffs to all the remaining mounting holes on the motherboard.
Then, lay the motherboard on the standoffs.
Warning: For proper cooling, please make sure that all the
chassis covers are installed before you operate the system. Out
of warranty damage can occur if this rule is not strictly followed.
!
2
A
3
4
(**Note: the CPU shown above is for reference only!! The motherboard is not
included in the SC832/SC833 shipping package.)