SC933 Chassis Manual
4-6
5.
Secure the CPU(s), heatsinks, and other components to the motherboard as
described in the motherboard documentation.
6. Connect the cables between the motherboard, backplane, chassis, front
panel, and power supply. The fans may be temporarily removed to allow ac-
cess to the backplane ports.
Expansion Slot Setup
The SC933 chassis includes six full-height, full-length PCI slots for expansion
cards.
Installing Expansion Cards
1.
Disconnect the power supply, lay the chassis on a flat surface, and open the
chassis cover.
2. Remove the screw holding the cover in place for each PCI slot you want to
use. Keep this screw for later use.
3. Secure each card to the chassis by sliding the card's L bracket into the PCI
slot.
4. Insert the card into the motherboard.