23
Chapter 2: Maintenance and Component Installation
4. Place up to two 15 mm 2.5" drives directly into the tray and secure it to the tray with the
screws provided with the drive.
Figure 2-5. Installing 15 mm 2.5" Hard Drives
5.
Optionally, for 9.5 mm 2.5" drives, place them inside the provided drive holders first,
then secure them on to the drive tray with the included screws as shown above.
6. Connect the drive data and power cables.
7.
Secure the tray to the chassis with the standoffs and screw previously set aside.
8. Attach the cables to the appropriate motherboard connector(s).
9. Reinstall the chassis cover and power up the system.
Figure 2-6. Installing 9.5 mm 2.5" Hard Drives
