15
Chapter 1: Introduction
Note:
The table above is continued on the next page.
Motherboard Features
BIOS
•
256Mb AMI BIOS SPI Flash ROM
•
ACPI 6.0 or later, SPI dual/quad speed support, and SMBIOS 3.1.1 or later
•
Riser Card auto detection support
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used. See the note on page 20.)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +12V, +3.3V standby, +5V standby, VBAT, CPU Core, memory, PCH
temperature, system temperature, and memory temperature
•
CPU 4+1 phase switching voltage regulator
•
CPU thermal trip support
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 140W (See Note 1 on next page.)
Fan Control
•
Eight 4-pin fan headers
•
Fan status monitoring via IPMI
•
Multi-speed fan control via onboard BMC
System Management
•
Trusted Platform Module (TPM) 2.0
•
PECI (Platform Environment Control Interface)/ TSI 2.0 support
•
SuperDoctor® 5, Watch Dog, Non-maskable interrupt (NMI), RoHS
•
IPMIView, SMCIPMITOOL, IPMICFG
•
Chassis intrusion header and detection (
Note:
Please connect a cable from the Chassis Intrusion header at JL1 to the
chassis to receive an alert via IPMI.)
LED Indicators
•
CPU/Overheating
•
Power/Suspend-state indicator
•
Fan failure
•
UID/remote UID
•
HDD activity
•
LAN activity
Dimensions
•
12.07" (L) x 10.15" (W) (306.58 mm x 257.81 mm)
