2-4
S
UPER
S
ERVER 1027R-73DARF User's Manual
2-4 Installing the System into a Rack
This section provides information on installing the SuperServer 1027R-73DARF into
a rack. If the system has already been mounted into a rack, you can skip ahead
to Sections 2-5 and 2-6.
Note:
This rail will fit a rack between 26" and 33.5" deep.
There are a variety of rack units on the market, which may mean the assembly
procedure will differ slightly. The following is a guideline for installing the 1027R-
73DARF into a rack with the rack rails provided. You should also refer to the instal-
lation instructions that came with the rack unit you are using.
Identifying the Sections of the Rack Rails
Each assembly consists of two sections: an inner fixed chassis rail that secures
directly to the server chassis and an outer fixed rack rail that secures directly to
the rack itself.
Figure 2-1. Identifying the Sections of the Rack Rails
Rail Extension
(Inner rail is pre-installed)
Outer Rails
Summary of Contents for 1027R-73DARF
