15
4. Troubleshooting
1. Problem: The SAT2-MV8's BIOS does not show up in DOS.
Recommended Solutions:
•
Make sure that the system has enough expansion ROM to initialize the
card. Remove other add-in cards if possible.
•
Make sure that the card is properly and fully seated in the PCI slot.
•
Check if the motherboard's BIOS is updated. (You can download a up-
dated BIOS from our web site at: www.supermicro.com.)
2. Problem: I cannot see the card in the operating system.
Recommended Solutions:
•
Make sure that the card is shown in the BIOS. If the card is shown in the
BIOS, a screen shown below will display. If it is not shown in the BIOS,
please find out the root cause of the problem by following the steps
listed above.
•
Make sure that the driver for the card is installed in the system.
Troubleshooting