2-13
Chapter 2: Chassis Description and Installation Instructions
Press the Locking Tab
I. Installing the Chassis Inner Rails (*Optional for the SC513)
(*Note: if your chassis does not come with chassis rails, please follow the
procedure listed on the last page to install the SC513 directly into the rack.)
Please make sure that the chassis covers and chassis rails are
installed on the chassis before you install the chassis into the
rack.
Procedures to Install Chassis Rails
2. Press the locking tab to release the inner rail from its locking position and
pull out the inner rail from the rail assembly. (*The inner rails are to be attached
to the chassis and the outer rails are to be installed in the rack.)
Outer rail (to be installed in the
rack)
Pull out the Inner
rail (to be
attached on the
chassis)
1. Included in the shipping package are a pair of rail assemblies. In each rail
assembly, locate the inner rail and the outer rail.
Before installing the Chassis rails:
1. Enclose the chassis with chassis covers.
2. Unplug the AC power cord(s).
3. Remove all external devices and connectors.
To avoid personal injury and property damage, please carefully
follow all the safety steps listed below:
STOP
