SC743 Chassis Manual
4-18
4-13 SCSI (Super) GEM Driver Installation Instructions
for Windows OS
Note: This driver is not necessary for other operating systems. If you have two SCA
backplanes, you will need to install the driver twice. The driver is located on the
Super Micro motherboard driver CD or may be downloaded from the Supermicro
ftp site: ftp://ftp.supermicro.com/driver/Qlogic/
Follow the procedure below to install this driver onto your system.
Installing the Driver
Right click on the
1.
My Computer
icon and choose
Properties
.
Select the
2.
Hardware
tab and click on
Device Manager
.
Open
3.
System Devices
or browse to the location of
GEM318
.
Right click on this device and select
4.
Properties
.
Click on
5.
Driver
tab and select
Update Driver
.
Click the
6.
Next
button twice.
Uncheck both options for
7.
Floppy Disk Drives
and
CD-ROM Drives
.
Select
8.
Specify a Location
and click the
Next
button.
Click on the
9.
Browse
button and select the drive containing the
Supermicro
Setup CD
.
Select the
10.
Qlogic
folder and click on the
Open
button.
System will automatically detect GEM318 and install the drive from this point
11.
on.
Or, use the following procedure:
Summary of Contents for SC743i-465
