SC743 Chassis Manual
4-4
4-3 Accessing the Hot-Swappable Drive Carriers
Hot-swappable drives may be removed and installed in the chassis without power-
ing-down the system and without opening the chassis cover.
Accessing and Removing Hard Drive Carriers
Unlock and open the drive carrier door as shown.
1.
Press the release tab located on the drive carrier. This will release the drive
2.
carrier from its locked position.
Lift up the drive carrier handle.
3.
Pull the drive carrier out from the chassis using the handle.
4.
Installing Hard Drive Carriers
Gently push the hard drive carrier all the way into the hard drive bay.
1.
Push in the drive carrier handle until it clicks into the locked position.
2.
(Note: The orientation of the picture shown below is for rack mount sys-
tems.)
Figure 4-3: Removing Hard Drive Carrier
1
2
4
3
