C-1
Appendix C: Backplane
Appendix C
SAS-827HD Backplane Specifications
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
C-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
•
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic
bag.
•
Handle the backplane by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
•
When handling chips or modules, avoid touching their pins.
•
Put the card and peripherals back into their antistatic bags when not in use.
C-2 General Safety Guidelines
•
Always disconnect power cables before installing or removing any components
from the computer, including the SAS-827HD backplane.
•
Disconnect the power cable before installing or removing any cables from the
SAS-827HD backplane.
•
Make sure that the SAS-827HD backplane is securely and properly installed
on the motherboard to prevent damage to the system due to power outage.
Summary of Contents for SC827HD-R1400B
