D-1
Appendix D BPN-SAS-846EL Backplane Specifications
Appendix D
BPN-SAS-846EL Backplane Specifications
Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety
steps listed below when accessing your system or handling the compo-
nents.
D-1 ESD Safety Guidelines
Electric Static Discharge (ESD) can damage electronic components. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
Touch a grounded metal object before removing a component from the antistatic
bag.
Handle the RAID card by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
Put the card and peripherals back into their antistatic bags when not in use.
D-2 General Safety Guidelines
Always disconnect power cables before installing or removing any components
from the computer, including the backplane.
Disconnect the power cable before installing or removing any cables from the
backplane.
Make sure that the backplane is securely and properly installed on the mother-
board to prevent damage to the system due to power shortage.
•
•
•
•
•
•
•
•
