E-1
Appendix E: SAS-826EL Backplane Specifications
Appendix E
SAS-826EL Backplane Specifications
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
E-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufficient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic
•
bag.
Handle the RAID card by its edges only; do not touch its components, peripheral
•
chips, memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
•
Put the card and peripherals back into their antistatic bags when not in use.
•
E-2 General Safety Guidelines
Always disconnect power cables before installing or removing any components
•
from the computer, including the SAS-826EL series backplane.
Make sure that the backplane is properly and securely on the motherboard to
•
prevent damage to the system due to power outages.
Summary of Contents for SC847A-R1400LPB
