SC847J SAS2 Chassis Manual
E-2
E-3 SC847J SAS2 E16 Series JBOD Chassis
Each SC847J SAS2 E16 series JBOD chassis contains two expander backplanes,
forty-five 3.5” drives (SAS or SATA) and a PTJBOD card. The PTJBOD card drives
the chassis LEDs and fans. See the CSE-PTJBOD-CB2 section below for details.
The content of this appendix will focus on how this chassis can be configured both
internally and externally.
There are two SAS2 backplanes that are used in the SC847J SAS2 E16 series.
BPN-SAS2-846EL1/EL2 and BPN-SAS2-847EL1/EL2. More detail on these two
backplanes and how you can internally connect them will be discussed in the back-
plane appendices of this manual. For external connectivity see page E-6.
It’s also very important to follow Supermicro’s Expander/HDD Compatibility list which
is published on Supermicro's website. All the components in the compatibility list
have been qualified and are recommended by Supermicro. Although components
outside of the compatibility list might work, they will not be supported by Supermicro.
See www.supermicro.com for the latest list. This document will focus on the single
expander version.
CSE-PTJBOD-CB2
The CSE-PTJBOD-CB2 power card drives the fans and power supplies in the
SC847J SAS2 chassis.
Figure E-1: CSE-PTJBOD-CB2
SMCI confidential document
2
Whitepaper
Section 1
– SC847E16 series SAS-2 JBOD chassis
Each SAS-2 847
JBOD
chassis
(i.e. SC847E16 series -)
contains 2 SAS-2 expander
backplanes, 45 3.5” drives (i.e. can be either SAS or SATA) and a PTJBOD card, see
Section 1.1
(i.e. CSE-PTJBOD-CB2). The PTJBOD drives the chassis’s LEDs and fans.
Here we will focus on how this chassis can be configured internally and externally.
There are two SAS-2 expander backplanes that are used in SC847E16 series. BPN-SAS2-
846EL1/2 and BPN-SAS2-826EL1/2. More detail on these two backplanes and how you
can internally connect them will be discussed in section 2. For external connectivity
please see section 3.
It’s also very important to follow SMCI’s “Expander/HDD compatibility” list which is
published on SMCI’s web site. All the components in the compatibility list have been
qualified and are recommended by SMCI. Although components outside of the
compatibility list might work but they will not be supported by SMCI. See
http://www.supermicro.com/products/nfo/files/storage/SAS-1-CompList.pdf
for latest
list. This document will focus on single expander version.
Section 1.1
- CSE-PTJBOD-CB2
This is a simple card which is used to drive the FAN and power supply in this JBOD unit.
Please see picture below:
This card is not in IO path and its main goal is to drive the sideband related elements of
the chassis.
Picture of
CSE-PTJBOD-CB2
Figure 1
Power
Connector
Fan
Connectors
I
2
C Connector Uses CBL 0102L
to connect to the backplane
Summary of Contents for SC847E16-R1K28JBOD
