SC847J SAS2 Chassis Manual
E-4
Figure E-3: BPN-SAS2-847EL1
Figure E-4: Special Connector Cable Board for use with SC847-E16
There is also dual version of the same expander which has two expander chips so
there are two paths to each drive behind the expander. It is mandatory to use SAS
drives when using the dual expander backplane. This is because the SAS drives
have dual connectivity, therefore enabling the redundancy feature. No SATA drives
should be used in dual expander backplanes.
Internal Cable
A special cable has been designed by Supermicro to connect the two backplanes
mentioned above to the side of the chassis.
SMCI confidential document
4
Whitepaper
There is also dual version of the same expander which has 2 expander chips therefore you
have two paths to each drive behind the expander. It is mandatory to use SAS drives
when you use the dual expander backplane. This is because the SAS drives have dual
connectivity therefore enabling the redundancy feature. So No SATA drives should be
used in dual expander backplanes.
Section 1.4
– Internal Cable
A special cable is designed to connect the two backplanes mentioned above to the side of
the chassis. See picture below:
Picture of BPN-SAS2-847EL1
Figure 3
Special connector cable board
to use w/ SC847E16 – top view
Figure 4
SMCI confidential document
4
Whitepaper
There is also dual version of the same expander which has 2 expander chips therefore you
have two paths to each drive behind the expander. It is mandatory to use SAS drives
when you use the dual expander backplane. This is because the SAS drives have dual
connectivity therefore enabling the redundancy feature. So No SATA drives should be
used in dual expander backplanes.
Section 1.4
– Internal Cable
A special cable is designed to connect the two backplanes mentioned above to the side of
the chassis. See picture below:
Picture of BPN-SAS2-847EL1
Figure 3
Special connector cable board
to use w/ SC847E16 – top view
Figure 4
J1 - Outbound
to Downstream
J0 - Inbound
from an Initiating
System
Summary of Contents for SC847E16-R1K28JBOD
