Chapter 5: Advanced Serverboard Setup
5-7
3. Once they are aligned, carefully lower the CPU straight down into the socket.
(Do not drop the CPU on the socket. Do not move the CPU horizontally or
vertically. Do not rub the CPU against the surface or against any pins of the
socket to avoid damaging the CPU or the socket.)
Warning: You can only install the CPU inside the socket in one direction.
Make sure that it is properly inserted into the CPU socket before closing
the load plate. If it doesn't close properly, do not force it as it may dam-
age your CPU. Instead, open the load plate again and double-check that
the CPU is aligned properly.
4. With the CPU inside the socket, inspect the four corners of the CPU to make
sure that the CPU is properly installed.
5. Close the load plate with the CPU inside the socket. Lock the 'Close 1st' lever
first, then lock the 'Open 1st' lever second. Use your thumb to gently push the
load levers down to the lever locks.
Summary of Contents for SUPERSERVER 1027TR-TF
