2-8
SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL
Installing the Outer Rails to the Rack (Figure 2-5)
1. Attach the front and rear short brackets to the outside of the long bracket.
Both bracket ends must face the same direction.
2. Adjust both the brackets to the proper distance so that the rail
fi
ts snugly into
the rack.
3. Secure the front side of the outer rail with two M5 screws and the rear side of
the outer rail with three M5 screws.
NOTE:
The outer rail is adjustable from
approximately 26" to 38.25".
4. Repeat steps 1-3 for the left outer rail.
Figure 2-5: Assembling the Outer Rails
Secure to the Front
of the Rack
Secure to the Rear
of the Rack
Attach to Rear Bracket
