iii
Preface
Preface
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
8047R-TRF+/7RFT+ Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 8047R-TRF+/7RFT+ is a high-end server based on the
SC748TQ-R1K43BP 4U rackmount chassis and the X9QRi-F+/X9QR7-TF+ dual
processor serverboard. The only difference between the two server models is
that the 8047R-7RFT+ server contains both SATA and SAS connections and the
8047R-TRF+ server only has SATA connections.
Manual Organization
Chapter 1: Introduction
The
fi
rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9QRi-F+/X9QR7-TF+
serverboard and the SC748TQ-R1K43BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
8047R-TRF+/7RFT+ into a rack and check out the server con
fi
guration prior to
powering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 8047R-TRF+/7RFT+.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9QRi-F+/X9QR7-TF+ serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
recon
fi
guring the serverboard.
