5-22
SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL
Reset Button
Pins 3 and 4 of JF1 attaches to the
reset button on the computer chassis.
See the table on the right for pin
de
fi
nitions.
Reset Button
Pin Defi nitions (JF1)
Pin# De
fi
nition
3
Reset
4
Ground
Overheat/Fan/Pwr Fail/UID LED
Connect an LED to pins 7 and 8 of JF1
to use the Overheat/Fan Fail/Power
Fail/UID LED functions. The red LED
on pin 7 provides warning of overheat,
fan failure or power failure. The blue
LED on pin 8 works as the front panel
UID LED indicator. The red LED takes
precedence over the blue LED by
default. Refer to the table on the right
for pin de
fi
nitions.
HDD LED
The HDD LED connection is located
on pins 13 and 14 of JF1. This LED is
used to display all SATA activity. See
the table on the right for pin de
fi
nitions.
NIC2 LED
Pin Defi nitions (JF1)
Pin# De
fi
nition
9
Activity
10
Link
NIC2 (JLAN2) LED
The LED connections for JLAN2 are on
pins 9 and 10 of JF1. Attach an LED
cable to display network activity. See
the table on the right for pin de
fi
nitions.
NIC1 LED
Pin Defi nitions (JF1)
Pin# De
fi
nition
11
Activity
12
Link
NIC1 (JLAN1) LED
The LED connections for JLAN1 are on
pins 11 and 12 of JF1. Attach an LED
cable to display network activity. See
the table on the right for pin de
fi
nitions.
OH/Fan Fail/ Pwr Fail/UID LED
Pin Defi nitions (JF1)
Pin# De
fi
nition
7
Red + (Blue LED Cathode)
8
Blue (OH/Fan Fail/
PWR Fail/UID LED)
OH/Fan Fail Indicator
Status
State De
fi
nition
Off
Normal
On
Overheat
Flashing
Fan Fail
HDD LED
Pin Defi nitions (JF1)
Pin# De
fi
nition
13
3.3V
14
HD Active
