6-6
SUPERSERVER 8047R-TRF+/7RFT+ USER'S MANUAL
Installing Hard Drives into the Drive Tray
1. Open the chassis cover.
2. Locate the drive tray you want to replace and pull the tray release tab for the
slot.
3. Push the drive tray toward the front of the chassis (Figure 6-6).
Figure 6-6: Remove Drive Tray
Drive Tray
Release Tabs
4. Place the hard drive to the hard drive tray. The hard drive can be SAS or
SCSI depending on your motherboard. The hard drive may not completely
fi
ll
the tray (Figure 6-7).
5. Secure the hard drive to the tray with four screws from the bottom.
6. Slide the hard drive into the chassis until the tray clicks into place.
7. Repeat these steps for each hard drive tray.