Appendix C: Software Installation
C-5
Viewing Array Properties
To view the properties of an existing array:
1.
At the BIOS prompt, press
Ctrl+A
.
2.
From the ARC menu, select
Array Configuration Utility (ACU)
.
3.
From the ACU menu, select
Manage Arrays
(as shown on the
previous screen.)
4.
From the List of Arrays dialog box, select the array you want to view
and press
Enter
.
The Array Properties dialog box appears, showing detailed
information on the array. The physical disks associated with the array are
displayed here.
5.
Press
Esc
to return to the previous menu.
Deleting Arrays
*Warning: Back up the data on an array before you delete it to prevent
the loss of data. Deleted arrays cannot be restored.
To delete an existing array:
1.
Turn on your computer and press
Ctrl+A
when prompted to access
the ARC utility.
2.
From the ARC main menu, select
Array Configuration Utility
(ACU)
.
3.
From the ACU menu, select
Manage Arrays
.
4.
Select the array you wish to delete and press
Delete
.
5.
In the Array Properties dialog box, select
Delete
and press
Enter
. The following prompt is displayed:
*Warning!! Deleting the array will render array unusable. Do you
want to delete the array?(Yes/No):
RAID 1 only
—the following prompt is also displayed:
Deleting the partition will result in data loss! Do you also want to
delete the partition? (Yes/No):
6.
Press
Yes
to delete the array or partition or
No
to return to the
previous menu.
7.
Press
Esc
to return to the previous menu.
