Chapter 4: BIOS
4-27
Set Supervisor Password
When the item Set Supervisor Password is highlighted, hit the <Enter> key. When
prompted, type the Supervisor's password in the dialogue box to set or to change
supervisor's password, which allows access to the BIOS.
Set User Password
When the item Set User Password is highlighted, hit the <Enter> key. When
prompted, type the user's password in the dialogue box to set or to change the
user's password, which allows access to the system at boot-up.
Fixed Disk Boot Sector
Select
Normal
to enable the function of Write-Protect to protect the boot sector
on the hard drives against viruses.
Password on Boot
When this feature is set to Enabled, a password is required for a user to enter the
system at bootup. The options are Enabled (password required) and
Disabled
(password not required).
