4-18
X8DA3/X8DAi
User’s Manual
Notes
: 1. The system may shut down if it continues for a long period to
prevent damage to the CPU.
2. The information provided above is for your reference only. For more
information on thermal management, please refer to Intel’s Web site at
www.Intel.com.
System Temperature:
The system temperature will be displayed (in degrees in
Celsius and Fahrenheit) as it is detected by the BIOS.
Voltage Monitoring
Vcore, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3VSB, and VBAT
System Fan Monitor
This feature allows the user to decide how the system controls the speeds of the
onboard fans. The CPU temperature and the fan speed are correlative. When
the CPU on-die temperature increases, the fan speed will also increase, and vice
versa. Select Workstation if your system is used as a Workstation. Select Server if
your system is used as a Server. Select “Disabled, (Full Speed @12V)” to disable
the fan speed control function and allow the onboard fans to constantly run at the
full speed (12V). The Options are:
Disabled (@full-speed)
, 4-pin (Server), 4-pin
(Workstation), and 4-pin (Super Quiet).
Fan1 ~ Fan 8 Reading
This feature displays the fan speed readings from fan interfaces Fan1 through
Fan5.
ACPI Confi guration
Use this feature to confi gure Advanced Confi guration and Power Interface (ACPI)
power management settings for your system.
ACPI Version Features
The options are ACPI v1.0,
ACPI v2.0
and ACPI v3.0. Please refer to ACPI's website
for further explanation: http://www.acpi.info/.
ACPI Suspend Mode
This option is used to select the ACPI State that is used for system suspend. The
options are S1 (POS), S3 (STR) and
Auto
.
S1 (POS) - All processor caches are erased, and stops executing instructions.
Power to the CPU(s) and RAM is maintained, but RAM is refreshed.
