Remote Control Instructions:
For the first time use of remote control or after replacing
the battery, you need to sync the remote to the car.
1.
Press and hold the car select button until the
remote indicator light starts to flash
2.
Then turn on the car and the remote indicator light
should turn off. This means the car and remote are
now paired.
If the blinking does not stop, repeat the steps.
This remote is equipped with soft start technology.
Usage Instructions
1.
Before use make sure the battery is connected
correctly and vehicle has been charged.
2.
Make sure the seat is screwed down and in place
3.
Before use make sure that the seatbelt is fastened
and ready for use.
