tire is slid completely on the axle, release the center button of the wheel to lock the
wheel into place
3.
Install the Front Wheels:
Apply thin coat of lubricating grease (supplied)
evenly over
approximately 4” of
each front axle. Slide one tire on each front
axle. While sliding on the tire, press the center of the wheel, once the tire is
slid completely on the axle, release the center button of the wheel to lock the
wheel into place.
4.
Install windshield and exterior mirrors:
Align the tabs on the bottom of the
windshield with the slots in the body of the car in the normal position of the
windshield. Press down firmly to snap the windshield into place. Put mirrors
into place on the body. Press down firmly until a clicking sound is heard,
(letting you know they have snapped into place).
5.
Install Steering Wheel:
Connect electrical connection between the steering wheel
and the wires from the car. Slide steering wheel onto the steering shaft. Align the
screw hole in the steering shaft and the steering wheel and slide the bolt through
the hole. Apply the nut to the end of the bolt and tighten until snug.
6.
Connecting the Battery:
Slide red wire with spade terminal onto the red or positive
(+) side of the battery. Slide the black wire with spade terminal onto the black or
negative (-) side of the battery. DO NOT INSERT THE RED WIRE ONTO THE BLACK
