Steering Wheel Assembly
1.
Connect the sound wire from the steering wheel to the wire located
within the steering column.
2.
Fit the steering wheel onto the steering column.
3.
Align the hole through the base of the steering wheel, with the hole
located through the steering column. Insert steering screw (13),
followed by the nut.
4.
Tighten the steering screw with a screwdriver.
Installing Mirrors
1.
Fit the mirror to the base located at the end of the dash board
on the outside of the vehicle.
2.
Insert the screw and tighten the screw using a screw driver.
(Repeat for each mirror)
