Installing the Adjustable Seat
1.
A
lign the seat into the cabin of the vehicle positioned closest to
the back of the car.
2.
Locate the red seat guides and 4 screws
(as shown in round picture above, labeled 2)
3.
Attach seat guide using 2 of the 4 screws. The seat guide needs
to be installed directly under one side of the seat from the
bottom of the car. and screw into place on the bottom side of
the car, directly under one side of the seat.
Repeat steps for opposite side
Installing the Light Bar
1
.
Connect the wire attached to the light bar to the wire from the
body, located in the location where the light bar attaches to the
vehicle.
2.
Fit the tabs on the light bar into the slots located on both sides
of the vehicle.
