3.
Installing Steering Wheel:
Locate the music/horn wire at the end of the
steering wheel, and connect it to the power wire located on the steering rod.
Once wires are connected, remove screw and nut located on the steering
wheel column. Once screw and nut are removed, align hole on steering
column with the hole located on the steering rod. Insert screw through the
hole, followed by tightening the screw to the nut until tight.
4.
Windshield Installation:
To install the windshield into the body of the car, align
the tabs located at the bottom of the windshield with the holes located above the
dash board at the front of the car. Insert tabs into the holes, and push down until
you hear a click.
