V 01-2017
www.superwind.com
29
7.2.1
Mast Tube Specifications
The yaw shaft of your
Superwind
fits into the following mast materials with the
appropriate integration bushing:
Common North American Mast Materials
Table No. 7.2.1.1
Mast Type
Inner Diameter
Outer Diameter
Wall Thickness
Stainless Steel Pipe
(2” sch 40)
52.46 mm
60.3 mm
3.92 mm
Stainless Steel Tube
(2 ¼”, 316L, 16 Gauge)
52.50 mm
57.15 mm
2.325 mm
Aluminum Pipe
(2” sch 40)
52.50 mm
60.325 mm
3.912 mm
When using any of the above mast materials, use a North American
Delrin® bushing for integration on ships, in salt water applications or
mobile trailers.
The North American Stainless steel integration bushing is used on tall towers and
historically high wind areas.
See below for common EU size masts and appropriate bushing sizes.
North American Delrin® bushing specification fits pipe with an ID ranging from 2.05” –
2.15” (this bushing OD is 2.16” and can be sanded down to spec).
North American Stainless Steel bushing – use only on high towers or in higher than
average wind areas; not aboard ships. This bushing cannot be sanded, and is specified
for immediate use.
Bushings
Table No. 7.2.1.2
BUSHING TYPE
INNER DIAMETER
OUTER DIAMETER
mm inches mm
inches
North American
Stainless Steel
42.2 1.66 52.1
2.05
North American
Delrin®
44.2 1.74
47.9
52.9
2.08
44.2 1.74
Bands
56
2.2
No
bands
EU Delrin®
54.6
2.15
7.2.2 Mounting the Turbine on the Mast
With welded tubes, ensure that the welding seam does not obstruct the insertion
of the yaw shaft. If necessary, an out-standing seam must be smoothed with a
round file or the like.
7.2.3 Preparations at the mast head:
Deburr or smooth the end of the tube carefully (inside and outside).
File off the welding seam if necessary.
Drill the two holes 7 mm (distance to the mast top: 35 mm) Graphic No. 7.2.2.3
on Page 30.
Summary of Contents for 350 12V
