background image

5

SAFETY INFORMATION 

Overheat Safety Feature
This heater is equipped with an overheat safety feature . When the internal components of the heater reach 

a certain temperature that could cause overheating or possible fire, the heater will automatically shut off . 

If the unit has been overheated, you will need to unplug the unit from the wall and replug it in to use the 

heater again .

WARNING: This heater has a voltage rating of 

120 volts . The cord has a three-blade, grounding-

type  plug .  An  adapter  is  available  for  connecting 

three-blade  grounding-type  plugs  to  two-slot 

receptacles .  The  grounding  lug  extending  from 

the  adapter  must  be  connected  to  a  permanent 

ground  such  as  a  properly  grounded  outlet  box . 

The  adapter  should  not  be  used  if  a  three-slot 

grounded receptacle is available .
DO NOT DEFEAT THE SAFETY PURPOSE OF THE 

GROUNDED PLUG . 

Grounding Pin

Grounding Means

Grounding Pin

Metal Screw

Cover of Grounded 

Outlet Box

WARNING: It is normal for the power cord to feel warm to the touch . However, a loose fit between the 

outlet and the plug may cause overheating of the plug . If this occurs, try inserting the plug into a differ-

ent outlet . Contact a qualified electrician to inspect the original outlet for damage .
Specifications 

Voltage Rating 

120 V (60 Hz)

Power Consumption

350 W

Unit Size

3 .35 in . (W) x 5 .04 in . (D) x 6 .38 in . (H)

Unit Weight

1 .18 lbs .

Summary of Contents for lifesmart LCHT1038US













Reviews: