18
Chapter 1
Introduction
The KeyTag
The KeyAdvantage KeyTag is used to attach vehicles keys to KeyBoxes and to track the activity of the vehicle
keys.
•
Vehicle keys are securely attached to the KeyTag with a tamper-evident KeyTag attachment.
•
Because the KeyBox recognizes when a KeyTag is present, the KeyTag is used to track accesses to a
particular vehicle’s keys.
Physical Characteristics
•
The KeyTag has metal contacts that connect to the KeyAdvantage KeyBox. The contacts in the key
container recognize when the contacts of a KeyTag are present and therefore that the vehicle keys are
present.
•
When the KeyTag makes contact with the KeyBox, the KeyBox reads the serial number and the vehicle ID
information programmed into the KeyTag.
•
If the metal contacts of the KeyTag do not connect with the KeyBox, the key container will not completely
close, providing visible evidence that the vehicle keys are not present.
•
The KeyTag attachment is secured to the vehicle keys using a crimp tool. Do not use vehicle key rings on
the KeyTag.
KeyTag Programming
• KeyTags are assigned to and unassigned from specific vehicles using the KeyAdvantage software and
programming base.
See
“Assigning KeyTags” to Vehicles
on page 44 for details on assigning KeyTags.
Summary of Contents for KeyAdvantage
