background image

4

Chapter 1   Introduction

INTRODUCTION

Call Before 

Showing (CBS)

Control access by requiring the buyer’s agent to call the listing 

agent to obtain a CBS code.

Input Update

Enter the code to update the XpressKEY.

About

View details about the XpressKEY and update the key.

Vibrate

Toggle the vibration on or off.

Display PIN/

Shackle

Display the PIN or Shackle code on or off.

Change PIN

Customize your Personal Identification Number.

Languages

Change the language to French, Spanish, or English.

Current Time

View the current time from the top status bar.

 

 

 

 

 

Battery Status

View from the top status bar how much battery is left in the key, 

when it is charging, if the battery is too hot and when to replace 

the battery, respectively.

Battery

The XpressKEY has a rechargeable, replaceable battery that was specifically designed for XpressKEY.  The 

battery should last several years (with average use) before it is replaced.  When replacing the battery, only use 

the approved Supra XpressKEY battery.  You can order the battery online through SupraWEB.

 

WARNING: 

Do not leave the XpressKEY or battery exposed to high (over 131°F/55°C).  Lithium Ion 

batteries have a risk of fire, explosion, and burns.  Do not short-circuit, crush, incinerate, or disassemble 

the battery.  Burning these batteries will generate toxic fumes.  Cool the exterior of the batteries to 

help  prevent  rupturing.    In  case  of  fire,  use  dry  chemical,  alcohol  resistant  foam,  or  carbon  dioxide 

fire extinguishers.  For specific information, see the battery manufacturer’s warnings and cautions at 

www.na.industrial.panasonic.com

.

Charging

Use the included micro-USB, off-the-shelf micro-USB, 

or car charger to charge the XpressKEY battery.  When 

the battery is fully charged, the battery icon shows full.    

It takes about three (3) hours to fully charge.
A warning displays on the XpressKEY when it has 25% 

battery life remaining.  A second warning displays when 

there is 15% battery charge remaining.  The XpressKEY 

will automatically shut down when the battery charge 

is at 5% and must be charged before the next use.  

To preserve battery power, the XpressKEY goes into 

Standby

 mode after 60 seconds of inactivity.  

If the 

Charge NOW

 warning displays, you will be able 

to open a keybox after a minimum 10 min of charging, 

then a full charge to the XpressKEY is required. 

Charging 

Port

Summary of Contents for XpressKEY










































Reviews: