13
Chapter 3 XpressKEY Operations
OPERA
TIONS
Obtain Key
To get a key from a keybox a Personal Identification Number (PIN) must be entered to perform the
Obtain Key
function. The XpressKEY gives an opportunity to to aim the XpressKEY at the keybox up to five (5) minute after
starting the operation. This allows you to enter the PIN in the car and then walk up to the keybox.
Note
: The distance between the XpressKEY and the infrared lens on the keybox should be less than a foot.
Direct sunlight can interfere with the infrared communication and shading the area between the XpressKEY
and the keybox may be required.
After performing an
Obtain Key
function, the XpressKEY automatically sends the activity to the servers when in
cellular range. When it is not in cell range then it will save the activity and send it to the servers when it is back
in range.
1. On the main screen tap
the
Key
icon.
2. Type in the PIN number
and tap
Enter
.
3. If prompted type in the
CBS code and tap
Enter
.
4.
Point
the key at the
keybox.
5. Press up on the
key container at the
bottom of the keybox.
6. Press
Done
on the
XpressKEY to exit.
Tip
: If you mistype the PIN
code, tap the to clear the
last number entered.
