Installation
15
Resetting Network Settings
1
Turn the power off.
2
Set DIP switch #2 to ON (right position).
3
After turning on and then connect the device with default values.
•
TCP/IP address: DHCP address assignment (If DHCP address assignment is failed, 169.254.0.1 will be set.)
•
Server mode: Disabled
•
RS-485: Default, 115200 bps
4
Change the TCP/IP address or RS-485 information.
5
Set DIP switch #2 to OFF (left position).
6
Turn the power off later on and then check the network setting is properly.