2. OPERATIONS
2.1. NOTICE BEFORE USING
1.
To optimise the life-cycle of the system,
the user is advised to start the water
pump before the heat pump, and turn off
the heat pump before the water pump.
2.
Check for any water leakage in connecting
pipework, then turn on the power supply,
press the ON/OFF button of the heat
pump, and set desired temperature.
2.2. OPERATION INSTRUCTIONS
DESIGNATION
OPERATION
Mute key
The mute key operation is used to enter and exit the silent mode with one click.
Mode key
Used to switch the unit mode and timing setting.
On/off key
Used to carry out startup & shutdown, cancel current operation, and return to
the last level of operation.
Up key
Used to page up, and increase variable value.
Down key
Used to page down, and decrease variable value.
Setting key
Used to enter the settings interface and confirm saving.
Cooling symbol
Will display during cooling (there is no limit to startup & shutdown, and is
optional when the unit is cooling only or heating and cooling).
Heating symbol
Will display during heating (there is no limit to startup & shutdown, and is
optional when the unit is heating only or heating and cooling).
Automatic symbol
Will display under the automatic mode (there is no limit to startup &
shutdown, and is optional when the unit is heating and cooling).
Defrosting symbol
Will display in the defrosting process.
Heatseeker NovaS Heat Pump
Installation & User Manual
06
Summary of Contents for Heatseeker NovaS
Page 37: ...10 9 Device Management Heatseeker NovaS Heat Pump Installation User Manual 35...
Page 38: ...Heatseeker NovaS Heat Pump Installation User Manual 36...
Page 42: ...NOTES Heatseeker NovaS Heat Pump Installation User Manual 40...
Page 43: ...Heatseeker NovaS Heat Pump Installation User Manual 41...
