Heatseeker UniPanel®
Solar Pool Heating
10
Enter Button
Pressing the button will turn on the LCD backlight, pressing the button while the
backlight is lit will enter the SETTINGS MENU;
The following will be displayed; 1) EXIT
The menu system can be navigated using the or buttons, all selectable and changeable
values will flash on the LCD screen. Press the button to accept the currently displayed
(flashing) item.
All menu items are shown below;
1) EXIT
2) CLOCK
3) SYSTEM
1) EXIT
Press on this menu to return to automatic operation.
2) CLOCK
When selecting the clock you will have to set the time of day. Set hours then minutes.
3) SYSTEM
System sub-menu;
EXIT
COOLING
LCD TIME
HOURS
SYSTEM SUB-MENU
EXIT
Press
on this menu to return to automatic operation.
COOLING
For situations where the pool water overheats beyond the set temperature limit due to direct
heating from the sun.
NOTE that heating & cooling is only allowed during the allowable time if solar run hours have been selected
LCD TIME
Adjust the number of seconds the backlight remains on after the time a button was pressed.
(Select NONE for always on.)
HOURS
For hours of solar operation (24hr Clock) First selecting the start time in hour intervals
(6:00 – 12:00) Then the end time (12:00 – 21:00)
Factory default for installer setup is run from 12:00-12:00 (24hrs).
