Heatseeker UniPanel®
Solar Pool Heating
02
General Information
Introduction to Heatseeker UniPanel®
Our design brief was simple... A rigid solar pool heating system manufactured to suit to
all applications in one unique compact design, and able to withstand the harsh impact of
Mother Nature.
This manual provides installation and operating instructions for the Heatseeker UniPanel®
solar pool heating system. Read this manual carefully before proceeding with the installation
and operation of your solar system. Consult your Heatseeker UniPanel® distributor with any
questions regarding the equipment.
Installation and service must be performed by a qualified installer. The manufacturer will not
be responsible for any damage to the system caused by improper installation, operation or
maintenance.
SPECIFICATIONS
Dimensions
Material
UV Stabilised high density
polyethylene (HDPE) black
Panel width (port to port)
1136mm
Panel length (port to port)
1095mm
Gross area
1.2m²
Weight
Empty
8.4kg
Full
17.8kg
Water volume
9.4L
Live load
14.83kg/m²
Flow Rates
Minimum
1.8L/min/m²
Maximum
4.8L/min/m²
Recommended
3.3L/min/m²
Performance
Hail rating
Rated to AS 2712-2007
Testing pressure
3.5 bar at 20°C
Operating pressure
Up to 150kPa at 40°C
Efficiency
86% at 1000W/m²
Temperature resistant
-15°C to 115°C
Density
953kg/m³
Tensile strength
26MPa
Elongation at break
600%
Flexural modulus
1200MPa
