15
Figure 3-14: Traditional Rectangular Surround
Components
Figure 3-15: Traditional Arched Surround
Components
3.4.2 Clean face Surround
The Clean Face surround comprises no louvers; however, an intake into the chase and an outtake through
gravity ducts is required for this configuration. The instructions below describe the installation of the Clean
Face surround. Refer to Figures 3-18 and 3-19 and Tables 3-4 and 3-5 for the instructions below. Refer to
Section 3.5 for Gravity Kit installation instructions.
1. Remove the door of the unit and place it on a soft surface, such as a carpet or cardboard, to avoid any
scratches or damages.
2. Align the Clean Face lower cover (Item 8) and fasten it in place (Figure 3-17).
3. Bend the ends of the Clean Face upper cover (Item 7), align it and fasten it in place (Figure 3-17).
4. Place the surround (Item 4 in Figure 3-18 or Item 5 in Figure 3-19) within the door holder and secure it
in place with 4 black screws (one on each corner). Make sure that the handles of the Combustion Air
Control pass through the slots of the surround.
5. Reinstall the door onto the unit.
6. Secure the Intake Swivel Covers on the bottom sides of the unit to the
open
position (Figure 3-16).
7.
Remove the two 8” knockouts at the top of the unit using a flat head screwdriver (Figure 3-20).
8. Through the openings of the knockouts, cut the exposed insulation. Make sure to remove any pieces of
insulation that has fallen into the unit.
9. Bend the tabs inside the 8 inch knockouts (Figure 3-21) upwards.
10. Install the 8 inch duct adapters (Item 9 in Figure 3-17) through the newly cut knockouts and screw them
to the bent tabs (Figure 3-22).
Table 3-2: UWA600 Components
TRADITIONAL RECTANGULAR
ITEM
DESCRIPTION
QTY
1
Traditional Rectangular Surround
1
6
Lower Support Bracket
1
7
Upper Support Bracket
1
Table 3-3: UWA610 Components
TRADITIONAL ARCHED
ITEM
DESCRIPTION
QTY
3
Traditional Arched Surround
1
6
Lower Support Bracket
1
7
Upper Support Bracket
1
Summary of Contents for 38SF
Page 43: ...40 CERTIFICATION LABEL...
