FOR JEEP WRANGLER, YJ, TJ, JK, AND JL WITH ORIGINAL EQUIPMENT DOORS.
CAREFULLY READ ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEM-
BLY/USE. THIS PRODUCT IS DESIGNED TO BE MOUNTED TO A WALL THAT
HAS STUDS SPACED 16” ON CENTER. DUE TO DIFFERENCES IN BUILDING
MATERIALS, MOUNTING HARDWARE IS NOT SUPPLIED. FAILURE TO SECURE
PRODUCT TO STUDS CAN RESULT IN DAMAGE TO PRODUCT, PROPERTY, OR
SERIOUS INJURY.
DOOR HOLDER BRACKET
FOR JEEP WRANGLER
DLXWMDH - 4/2020
6
ADJUST THE DOOR STRAP RETAINER VIA THE ADJUSTABLE PEG FOR
DOOR RETENTION. WEAVE STRAP AS SHOWN AND ELIMINATE SLACK.
REPEAT FOR THE REMAINING DOOR. PROPER ADJUSTMENT PREVENTS
DOOR FROM SWINGING OUTWARD.
5
ENSURE BRACKET IS SECURED. LOCATE THE INSERT THAT WILL FIT YOUR
JEEP AND INSTALL INTO THE DOOR BRACKET. CAREFULLY LIFT THE JEEP
DOOR AND INSERT DOOR HINGE PINS INTO THE INSERT AS SHOWN. THE
LOWER BRACKET HAS SLOTTED HOLES FOR ADJUSTMENT FOR DIFFER
ENT PIN LOCATIONS. LIFT THE BRACKET UNTIL IT FULLY SEATS DOOR PIN
AND TIGHTEN BOLTS FOR LOWER DOOR SUPPORT.
