I
MPORTANT SAFETY INSTRUCTIONS
(continued)
Battery leakage may occur under extreme usage or temperature conditions. Avoid contact with
skin and eyes. Battery liquid could cause chemical burns. Avoid contact with skin and eyes. If
there is contact, wash quickly with soap and water and contact medical attention.
Place charger on flat non-flammable surfaces and away from flammable materials when re-
charging battery pack. Charger and battery pack heat during charging. Carpeting and other
heat insulating surfaces block proper air circulation which may cause overheating of the charger
and battery pack.
BATTERY CARE:
When batteries are not in tool or charger, keep them away from metal objects.
Do not place batteries in a toolbox with nails, screws, etc. Fire or injury may result.
BATTERY DISPOSAL:
Lithium-Ion Batteries must be collected, recycled or disposed of in an
environmentally sound manner. Please call 1-800-8-BATTERY for info on Li-ion
battery recycling and disposal bans/restrictions in your area.
EXTENSION CORDS:
When using an extension cord, have an adequate size conductor that is
capable of carrying the current necessary for your tool. Grounded tools must use 3-wire
extension cords that have 3-prong plugs and receptacles.
WARNING:
This product contains chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm. (This warning is given in compliance with California’s
Proposition 65.)
5
2
WARNING
!
WARNING
!
Save this manual and battery charger manual and have it available for tool operators reference!
A
B
C
D
G
H
I
F
E
Glue Stick Size = 7/16” (.43”) Standard (10" or 15" lengths)
www.surebonder.com
Specialty Nozzles Available
A) “T” Nozzle #6032
B) Block Ribbon Nozzle #102
C) .053 Flat Extension #103F
D) .125 Round Extension #103R
E) .080 Needle Extension #103N
F) Check Valve Adaptor #101
G) .125 cap #103CS-125
H) .090 cap #103CS-090
I) .076 cap #103CS-076
Note:
all nozzles need the check valve adaptor #101(F)
®
