OPERATION
Power Indicator Light
Blue Light - Cordless
Red Light - Corded
Trigger
Insulated
Interchangeable
Nozzle
Ergonomic handle
Battery Pack Battery Charger
AC Power Cord
Hybrid-120 Glue Gun
3
4
Battery Power
On/Off switch
Safety Fuse
Enhanced protection
Cordless Features:
•
18 Volt, 120 Watts
•
Uses Ryobi P128-18V One+Lithium-Ion
battery and charger kit
Corded Features:
•
120 Volt, 120 Watts
•
Uses 8 ft. AC Power Cord
Technical Data
Glue Stick Size - 7/16” (.43”) Standard (10" and 15" lengths)
Cordless Heating Power - 18 Volt, 120 watts
Corded Heating Power - 120 Volt, 120 watts
Operating Temperature - 193
°
C / 380
°
F
Glue Gun Weight - 1.45 lbs.
Features
8ft. AC Power Cord (included)
Ryobi 18V
Lithium-Ion
Battery
AC Power Adaptor Plug
• P102
Ryobi 18V Lithium-ion Compact Battery,1 hour use
+
• P108 Ryobi 18V Lithium-ion
+
High Capacity Battery, 4 hour use
• P117
Ryobi 18V Lithium-ion
+
1hour charger
• P125 Ryobi 18V Lithium-ion
+
1hour, 6 port charger
Batteries Sold Separately at Home Depot Stores
Chargers Sold Separately at Home Depot Stores
Turning Off your Industrial Cordless/Corded Glue Gun
Cordless:
Turn glue gun on/off switch to the
“
off
”
position.
Corded:
Turn glue gun off by unpluging
a/c cord from power outlet. To further ensure battery is not on, make sure power indicator light is off.
Wait one minute for the gun to begin cooling, squeeze trigger 3 or 4 times to clear nozzle of melted
glue and advance glue stick into the melting chamber. This will allow a quicker startup the next time
the glue gun is used. Allow glue gun to cool in its normal vertical position, after 60 minutes it should
be cool enough to store away.
Preventive Maintenance
®
For best results, use only Surebonder 7/16” (.43”) standard glue sticks.
DO NOT pull glue stick out of the back of the glue gun or tilt glue gun back, this may cause glue to
flow out back of glue gun, causing a condition called “back-melt.” Back-melt can cause skin burns
and/or permanent damage to the glue gun.
P128 Ryobi Battery/Charger (both included)
Hybrid-120Kit Includes:
Hybrid-120 Glue Gun, P-128 Ryobi 18V
Lithium-Ion One+Compact Battery
&
Charger, and 8ft. AC Power Cord
