1. Plug the glue gun into any AC outlet with required specification; Turn glue gun on by switching
the switch to the “on” (-) position.
2. Allow the tool to heat for approximately 2-3 minutes. Insert a 7/16” adhesive stick into
the back of the gun.
3. When the gun is fully heated, squeeze the trigger slowly, until the melted glue begins to flow
from the nozzle. Release the trigger to stop the glue flow.
4. The output volume of the glue can be adjusted by adjusting the stroke adjustor screw.
5. Different nozzle tips are available for different gluing applications and output amount.
Save these safety rules for future use:
1. It is normal for this tool to become quite warm during use. This is normal and does not indicate
a problem.
2. The glue gun should be unplugged after use or if it will not be used within a 2 hour period.
3. If you accidently touch the molten hot glue, immediately immerse the affected area in cold
water and call a doctor. The injured area should be attended by a medical professional.
4. Some materials are heat sensitive and can be damaged by the hot nozzle or even the hot
glue. Whenever possible, test a piece of scrap material or a hidden portion of the object
being repaired.
Shutting down your Industrial Glue Gun
Turn glue gun off by switching the switch to the “off” (0) position.
Unplug the glue gun from the power source.
Wait one minute for the gun to begin cooling, squeeze trigger 3 or 4 times to clear nozzle of
melted glue and advance glue stick into the melting chamber. This will allow a quicker startup the
next time the glue gun is used.
Allow glue gun to cool in its normal vertical position, after 60 minutes it should be cool enough to
put away.
Preventive Maintenance
®
For best results, use only Surebonder 7/16” glue sticks.
DO NOT pull glue stick from the back of the glue gun or tilt glue gun back, this may cause glue to
flow out back of glue gun, causing a condition called “back-melt.” Back-melt can cause skin burns
and/or permanent damage to the glue gun.
Technical Data
Glue Stick Size = 7/16” Diameter (4",10" and 15" glue stick lengths available)
Heating Power = 220 Watts
Operating Temperature =
º
380
°
F (193
C)
Weight =
1.45 lbs.
OPERATION
Stroke Adjustment
Trigger
Ergonomic handle
Extended metal stand
Interchangeable nozzle
Features
•
220 watts
•
Lightweight and durable body
• Lighted On/Off power switch
•
Unique trigger and handle with ergonomic design
•
Stroke adjustment option allows user to preset the amount of glue output
•
Extended metal stand for extra stability
3
4
On/Off switch
Safety Fuse
Safety Fuse
Enhanced protection
