5
5
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com
Step 1: Mount Outside Antenna
Before you begin, please note that your installation may require the use of a mast or RV mounting
system on which to mount the outside antenna. One has not been provided and may be obtained by
a 3rd party.
The provided antenna is omni-directional, which receives and sends signals in a 360º radius. Mount
the antenna at the highest pos-
sible elevation and in an upright
position.
Ensure that the mounting area
has at least a 12-inch radius
clear of obstructions and other
radiating elements.
Installation:
1. Assemble the L-Bracket with
U-bolts, brackets, nuts and washers and secure to mast.as shown in the illustration
2. Remove all three screws from antenna base
3. Secure antenna to the horizontal plate of L-Bracket using screws.
4. Connect one end of the provided coax cable to the antenna and tighten the connection.
Cable
U-Bolts
Washers
Nuts
L-Bracket
Mast
(not provided)
Installation
Whip Antenna
Fusion2Go 3.0
Omni Antenna
Cable
