7
7
SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com
Step 3. Connect Power
Connect the DC power adapter to the signal booster and plug into power outlet. The Power LED will
light, indicating that the signal booster is ready for use.
Installation
Cable
LTE-A
LTE-V
CELLULAR
PCS
AWS
POWER
Fusion2Go 3.0
Omni Antenna
LED Indicators
In the event Red LEDs appear either solid or flashing, further separation between the booster and
outside antenna is recommended.
Note that the booster case may become warm during operation. This is normal.
WARNING.
The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the
booster and/or cause personal injury.