background image

Three-Year Product Warranty

SureCall warrants its products for three years from the date of purchase against defects in workmanship and/or materials. Specifica

-

tions are subject to change. The three-year warranty only applies to products meeting the latest FCC Certification Guidelines stated 

on 2/20/2013 and going into effect April 30, 2014. A two-year warranty applies to any products manufactured before May 1, 2014.

Products returned by customers must be in their original, un-modified condition, shipped in the original or protective 

packaging 

with proof-of-purchase documentation enclosed, and a Return Merchandise Authorization (RMA) number printed clearly on the 

outside of the shipping container. 

Buyers may obtain an RMA number for warranty returns by calling the SureCall Return Department toll-free at 1-888-365-

6283. Any returns received by SureCall without an RMA number clearly printed on the outside of the shipping container will 

be returned to sender. In order to receive full credit for signal boosters, all accessories originally included in the signal booster 

box must be returned with the signal booster. (The Buyer does not need to include accessories sold in addition to the signal 

booster, such as antennas or cables.) 

This warranty does not apply to any product determined by SureCall to have been subjected to misuse, abuse, neglect, or 

mishandling that alters or damages the product’s physical or electronic properties.

SureCall warrants to the Buyer that each of its products, when shipped, will be free from defects in material and workman-

ship, and will perform in full accordance with applicable specifications. The limit of liability under this warranty is, at SureCall’s 

option, to repair or replace any product or part thereof which was purchased up to THREE YEARS after May 1, 2014 or TWO 

YEARS for products purchased before May 1, 2014, as determined by examination by SureCall, prove defective in material 

and/or workmanship. Warranty returns must first be authorized in writing by SureCall. Disassembly of any SureCall product by 

anyone other than an authorized representative of SureCall voids this warranty in its entirety. SureCall reserves the right to make 

changes in any of its products without incurring any obligation to make the same changes on previously delivered products. 

As a condition to the warranties provided for herein, the Buyer will prepay the shipping charges for all products returned to 

SureCall for repair, and SureCall will pay the return shipping with the exception of products returned from outside the United 

States, in which case the Buyer will pay the shipping charges. 

The Buyer will pay the cost of inspecting and testing any goods returned under the warranty or otherwise, which are found to 

meet the applicable specifications or which are not defective or not covered by this warranty. 

Products sold by SureCall shall not be considered defective or non-conforming to the Buyer’s order if they satisfactorily fulfill the 

performance requirements that were published in the product specification literature, or in accordance with samples provided 

by SureCall. This warranty shall not apply to any products or parts thereof which have been subject to accident, negligence, 

alteration, abuse, or misuse. SureCall makes no warranty whatsoever in respect to accessories or parts not supplied by it.

16

Warranty

La puissance de sortie nominale indiquée par le fabricant pour cet appareil concerne son fonctionnement avec  

porteuse unique. Pour des appareils avec porteuses multiples, on doit réduire la valeur nominale de 3,5 dB, surtout  

si le signal de sortie est retransmis et qu’il peut causer du brouillage aux utilisateurs de bandes adjacentes. Une  

telle réduction doit porter sur la puissance d’entrée ou sur le gain, et ne doit pas se faire au moyen d’un atténuateur  

raccordé à la sortie du dispositif.
This Class A digital apparatus meets all requirements of the Canadian Interference

Causing Equipment Regulations. Operation is subject to the following two conditions; (1) this device digital apparatus 

meets all requirements of the Canadian Interference Causing Equipment Regulations. Operation is subject to the 

following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation
Cet appareillage numérique de la classe A répond a toutes les exigencies de l’interférence canadienne causant des 

réglements d’équipment. L’opération est sujette aux deux conditions suivantes: (1) ce dispositif peut ne pas causer 

l’interférence nocive, et (2) ce dispositif doit accepter n’importe quelle intérference reçue, y compris l’intérference qui 

peut causer l’opération peu désirée.

SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | sales@surecall.com

16

Summary of Contents for FUSION4H



















Reviews: