SureCall | www.surecall.com | 1-888-365-6283 | support@surecall.com
7
Installation
STEP 3. CONNECT TO POWER
1. Plug the DC Power Adapter into power port of your car.
2. Switch the Power Switch to On and a red light will illuminate on the adapter.
3. The cradle antenna will illuminate a green light when it is receiving power.
Note: Your phone will only receive the enhanced signal when it is placed on the
cradle antenna.
When your car is off, turn the power switch to OFF to keep the booster from con-
tinuing to draw power from your vehicle.
Power
switch
Power LED
Power connector
Cable to booster
WARNING: The booster is rated for 5-15V input voltage. DO NOT use the booster with a higher voltage power supply. This can damage the
booster and/or cause personal injury.
