When can the “Activate Raid Set” function be used?
In order to access the Volume Set and corresponding data, use the
Activate Incomplete RAID
Set
function to active the Raid Set. After selecting this function, the Raid State will change to
“
Degraded
” state. It possible to avoid this if the missing disk drive in returned or if failed to spin up,
by power cycling the chassis again.
To activate the incomplete the Raid Set, click on the
Activate Incomplete RAID Set
link
.
A
“Select The Raid Set To Activate” screen is displayed showing all existing Raid Sets in the subsystem.
Select the Raid Set with “
Incomplete
” state which you want to activate in the Select column.
Click on the
Submit
button to activate the Raid Set. The Volume Set(s) associated with the Raid
Set will become accessible in “
Degraded
” mode.
NOTE: The “Activate Raid Set” function is only used when Raid Set State is
“Incomplete”. It cannot be used when Raid Set configuration is lost. In case
the Raid Set configuration is lost, contact Partners Data Systems for support
before continuing.
5.2.6 Create Hot Spare
The Create Hot Spare option gives you the ability to define a global hot spare.
When you choose the
Create Hot Spare
option in the Raid Set Function, all unused (non
Raid Set member) disk drives in the subsystem appear. Select the target disk drive by
clicking on the appropriate check box. Click on the
Confirm The Operation
and click on the
Submit
button to create hot spare drive(s).
Summary of Contents for TRITON 16Ni
