5.3.4.1 Volume Set Expansion
Volume Capacity (Logical Volume Concatenation Plus Re-stripe)
Use the Expand Raid Set function to expand a Raid Set when a disk is added to your subsystem.
(Refer to Section 5.2.3)
The expanded capacity can be used to enlarge the Volume Set size or create another Volume Set.
Use the Modify Volume Set function to expand the Volume Set capacity. Select the Volume Set and
move the cursor to the
Volume Set Capacity
item and enter the capacity size.
NOTE: For Volume Sets used by the proNAS operating system, after expanding a
Raid Set, create a new Volume Set under that Raid Set. The new Volume Set will
appear as a new disk device to the proNAS operating system. It is not
recommended to expand the capacity of a Volume Set already joined to proNAS
Volume Group. Modifying the RAID level is supported. Otherwise, for Volume
Sets used for external SAS block device volumes, Volume Expansion is
supported. See specific host operating system disk device and file system rules
for expanding its OS partitions and files systems before expanding Volume
Set(s), see example below of expanding a Volume Set not used by the proNAS
operating system.
Enter new value and click on the
Confirm The Operation
and click on the
Submit
button to
complete the action. The Volume Set starts to expand.
NOTE: The Volume Set capacity of Raid30/50/60 cannot be expanded.
Summary of Contents for TRITON 16Ni
