surfsight.net | info@surfsight.net | page 6
INSTALLING YOUR SURFSIGHT
Initial setup
•
Using the specialty screwdriver unscrew the safety screw that
locks the tamper proof case on the side of the camera.
•
Insert the SIM and SD card into the appropriate slots in the
camera
•
Mount the camera by attaching the mounting bracket to the
camera, remove the 3M adhesive tape cover and mount the
camera to the windscreen. The camera should be placed as high as
possible on the driver side of the vehicle.
Make sure the glass is clean and dry before attaching the
3M adhesive mount to the windshield.
Do not install the product in a location where it can
obstruct the drivers field of vision.
Summary of Contents for RemoteFound AI-12
Page 1: ...Surfsight AI 12 User Guide...
